Industrial professional sealer for leather / textile and synthetic fibers, alcohol-based
Item number: 6005-683 – Rapido Fabric Protection R2U
- Solvent-based (isopropanol) fluorocarbon polymer solution
- The color impression and grip of the treated substrate are retained
- Excellent water, oil and dirt repellency (easy-to-clean effect)
- Permanent protective function
- Non-stick properties and breathable
- Fast drying even at room temperature
- High UV stability and environmental compatibility (free of PFOS, PFOA, APEO)
- Ready-to-use solution
The information on the associated safety data sheet (SDS) must be observed. 6005-683 should be stored in a dry, well-ventilated and cool (20 ° C) place. Keep / store only in the tightly closed original container. Protect from direct sunlight and frost. If stored properly, the minimum shelf life is 12 months from the date of manufacture. Keep out of the reach of children.
6005-683 is particularly suitable as a water, oil and dirt-repellent fiber protection for textile substrates and forms an invisible protective layer on the treated substrate immediately after correct application and drying. The color impression and grip are retained.
6005-683 is suitable for a variety of applications, such as the impregnation of:
- Home textiles
- Leather / suede
- Vehicle preparation
- Seat covers
- and much more …
Avoid aerosol formation, do not inhale aerosols.
Suitable respiratory protection is essential.
Contains flammable solvents. Observe the safety data sheet (SDS) before use.
Before use, test areas must be created or sample applications must be carried out. The material compatibility of the impregnation agent with the substrate to be treated must always be checked before use. Only use in well-ventilated areas. The substrate to be impregnated must be cleaned thoroughly and must be dry and free from anionic residues (surfactants) before application with 6005-683.
6005-683 is applied using a brush / roller method or a sponge applicator. A covering and even wetting of the substrate must be ensured. The impregnation is fully functional immediately after drying (within 24 hours at 20 ° C). No heat treatment of the impregnated substrate is necessary. If 6005-683 is used in the spray process, sufficient suction must be available or breathing protection must be used.
Aerosols must not be inhaled and appropriate precautions must be taken.
Appearance: Cloudy liquid
Density: approx. 0.85 g / cm³
Shelf life: 12 months at 20 ° C
6005-683 is supplied ready to use and applied undiluted. The yield depends very much on the absorbency of the substrate to be impregnated.
Notes on product suitability
Before a possible application, a suitability test must be carried out under realistic conditions (production conditions). Included
the dosage can be adapted to the properties of the substrate.
The information on the associated safety data sheet (SDS) must be observed.
Spraying 6005-683 produces aerosols. These can represent a potential hazard for humans. 6005-683 should therefore only be sprayed or optimally extracted in closed systems and ensure good room ventilation to prevent aerosols from spreading
to prevent in the work environment. Do not breathe aerosols. Keep sources of ignition away – do not smoke.
Take precautionary measures against electrostatic charging. Vapors can form an explosive mixture with air.